Assembly3 ConstraintPointsCoincident/pl

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wiki dla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Other languages:
Perpendicular
Point on plane
Assembly3

Assembly3 ConstraintPointsCoincident

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

The Assembly3 ConstraintPointsCoincident command builds a link between two objects of an assembly and fixes the distance between them and the orientation to each other. The selected elements of each object or more precisely their implicit coordinate systems (ICS) are used to position one object to another.

Assuming the first object is already locked in place by the Lock constraint then the following object is moved to a position where both ICSs' origins are in the same place.

Related to the first object the following object can still spin around the origin (around all three axes). This is leaving 3 degrees of freedom (DOFs) for each link unconstrained.

This constraint accepts any type of element!

Usage

  1. Place two objects into an assembly
  2. Select one element of each object
  3. Activate the Assembly3 ConstraintPointsCoincident command using:

Kinematic Equivalent

Used in kinematic context this constraint resembles a ball (and socket) joint.

In real life we cannot handle points and so spherical faces are used to represent the linked points.

Constrained objects before and after running the solver


Perpendicular
Point on plane
Assembly3
Centrum użytkownika